Technical University of Gabrovo (Технически университет - Габрово ) is one of 13 universities included in U-Multirank for Bulgaria. Technical University of Gabrovo is a small public university located in Gabrovo with 1034 students enrolled (2017 data or latest available). It was founded in 1964. It offers programmes in foreign languages. The graduation rate of Technical University of Gabrovo is 55,87 (bachelors) and 64,72 (masters). As made clear by its sunburst chart – a snapshot illustration of the university’s performance profile across the five U-Multirank dimensions – the Technical University of Gabrovo is strongest in Knowledge Transfer. Its overall profile shows top performance across various indicators, with 2 ‘A’ (very good) scores overall. For a comprehensive overview of this university’s performance, see its complete performance scores in the tables below.
Technical University of Gabrovo
4 "Hadji Dimitar", Str.
5306 Gabrovo
Bulgaria
Embed sunburst: <iframe src=https://www.umultirank.org/university-performance-charts/technical-university-of-gabrovo-rankings scrolling=no style="height:274px;width:300px;border:none; padding-left: 0px; padding-top: 0px;"/>
Compare Technical University of Gabrovo to other universities
U-Multirank's unique 'Sunburst chart' gives an illustration of a university's performance profile across the five U-Multirank dimensions. These are indicated in different colours. For instance, the teaching and learning dimension is symbolised by the colour green. Each 'sunray' represents one of the thirty plus U-Multirank indicators. The longer the ray, the better the performance of an institution on the selected indicator: a full-length ray stands for 'top group' performance, whereas a short ray means 'weak' performance. A missing sunray indicates that the specific data indicator is not available. An institution's performance in an indicator can be identified by moving the cursor over the rays. A key guard for the sunburst chart is provided here .
Bachelor graduation rate
55.87
%0
100
Masters graduation rate
64.72
%0
100
Graduating on time (bachelors)
62.44
%0
100
Graduating on time (masters)
54.76
%0
100
Relative BA graduate unemployment
32
%Relative MA graduate unemployment
15
%Relative graduate unemployment long first degree
Graduating on time (long first degree)
0
100
Graduation rate long first degree
0
100
Citation rate
Research publications (absolute numbers)
34
1
67,252
Research publications (size-normalised)
0.029
0
13.53
External research income
0
282.88
Art related output
0
1.99
Top cited publications
Interdisciplinary publications
Post-doc positions
20.93
%0
100
Strategic research partnerships
220
Professional publications
0
4,589.01
Open Access Publications
Co-publications with industrial partners
Income from private sources
2.41
0
236.5
Patents awarded (absolute numbers)
1
0
2,416
Patents awarded (size-normalised)
0.855
0
483.1
Industry co-patents
Spin-offs
0
222.2
Publications cited in patents
Income from continuous professional development
2.5
%0
100
Graduate companies
0
81.5
Foreign language bachelor programmes
21.88
%0
100
Foreign language master programmes
2.22
%0
100
Foreign language long first degree programmes
Student mobility
0.04
0
1
International academic staff
0
100
International joint publications
International doctorate degrees
0
100
Bachelor graduates working in the region
Master graduates working in the region
Student internships in the region
38.86
%0
100
Regional joint publications
Income from regional sources
2.77
%0
100
Regional Publications with Industrial Partners
Female academic staff
Student-staff ratio
113.9
5.1
Graduating on time (bachelors)
64.2
%0
100
Graduating on time (masters)
63.9
%0
100
Academic staff with doctorates
100
%11.1
100
Contact with work environment (bachelors)
5
/90
9
Contact with work environment (masters)
3
/90
9
Gender balance
1.03
2.86
0.01
Overall learning experience
1.48
6
1
Quality of courses & teaching
1.58
6
1
Organisation of program
1.52
6
1
Contact with teachers
1.54
6
1
Inclusion of work/practical experience
1.7
6
1
Library facilities
1.57
6
1
Laboratory facilities
1.53
6
1
IT provision
1.62
6
1
Digital teaching
1.83
6
1
Room facilities
1.55
6
1
External research income
2.1
0.1
367.9
Doctorate productivity
0.45
0
1.05
Research publications (absolute numbers)
2
1
2,538
Citation rate
Top cited publications
0
27.2
Interdisciplinary publications
Research orientation of teaching
1.69
6
1
Income from private sources
0
100
Co-publications with industrial partners
Publications cited in patents
BA theses in cooperation with private organisations
9,85
MA theses in cooperation with private organisations
17,01
International orientation of bachelor programmes
6
/150
15
International orientation of master programmes
2
/150
15
Opportunities to study abroad
1.81
6
1
International doctorate degrees
0
89.47
International joint publications
International research grants
25
0
100
Student internships in the region
76.3
%0
100
Regional joint publications
Academic staff (fte)
24
Total number of students in field (major)
80
Percentage of female students
21
%Profile in teaching & learning
The department provides the teaching in the main fields of automation, including Control theory, Microprocessors and microcontrollers, Programmable logic controllers, Computer-based control systems, Technical means of automation, Object-oriented progra...
The department provides the teaching in the main fields of automation, including Control theory, Microprocessors and microcontrollers, Programmable logic controllers, Computer-based control systems, Technical means of automation, Object-oriented programming, Data bases, Industrial networks, Intelligent sensors and systems etc. There are six laboratories in the department, equipped with modern technics from some of the leading companies in the field of automation – SIEMENS, FANUC, BECKHOFF Automation, UNITRONICS, АМК GmbH, COMECO.
Teaching & learning website
www.tugab.bg
Profile in research
The scientific work in the department is concentrated in the following topics: Control of technological objects and electro-mechanical systems, Sensor and microprocessor technics, Synchronization and control of chaotic systems. The results of the scien...
The scientific work in the department is concentrated in the following topics: Control of technological objects and electro-mechanical systems, Sensor and microprocessor technics, Synchronization and control of chaotic systems. The results of the scientific work in the department are integrated in the teaching process. Students and PhD Students are regularly taking part in the scientific work in the department. The results are published in scientific journals, including journals with Impact factor, as Sensors and Actuators, Sensors and Materials, Physics Letters etc
Research website
www.tugab.bg
Major profile of faculty
Computer Science, Applied computer science
Computer Science, Applied computer science
Graduating in time
79.7
%0
100
Contact with work environment
5
/90
9
Relative rate of graduate unemployment
Program international orientation
6
/130
13
Graduates employment in the region
51-75
Total number of students
328
Students in their 1st year
80
International students
2
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
The curriculum for CST degree course aims at providing the students with quality instruction and skills which are necessary for their realization as leading specialists in the constantly renewing theory and practice in computer systems and technologies...
The curriculum for CST degree course aims at providing the students with quality instruction and skills which are necessary for their realization as leading specialists in the constantly renewing theory and practice in computer systems and technologies. Our graduates are expected to be competent and highly qualified professionals in the field of software and hardware as well as to be prepared to pursue higher educational degrees. The study programs are developed to assure advanced level of education and meet the requirements of businesses involved in the computer industry
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Graduating in time
69
%0
100
Contact with work environment
5
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
5
/130
13
Graduates employment in the region
51-75
Total number of students
169
Students in their 1st year
54
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
The Department of Communication Equipment and Technologies has specialized laboratories for conducting practical classes and research, equipped with modern electronic measurement tools and computers. Students who graduate in Communication Equipment and...
The Department of Communication Equipment and Technologies has specialized laboratories for conducting practical classes and research, equipped with modern electronic measurement tools and computers. Students who graduate in Communication Equipment and Technologies can find employment as: − designers, technologists, service, marketing and trade specialists, experts and consultants, managers and executives in the area of electronic communications and technologies within the telecommunication companies; − organizers, experts and consultants in operation;
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Graduating in time
46.3
%0
100
Contact with work environment
5
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
5
/130
13
Graduates employment in the region
51-75
Total number of students
188
Students in their 1st year
56
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
The teaching plan for this degree is generally organized in two parts. The first part includes the first 4 semesters and contains some fundamental courses, such as Matahematics, Physics, General programming, Electrotechnics, Measuring technics, Electro...
The teaching plan for this degree is generally organized in two parts. The first part includes the first 4 semesters and contains some fundamental courses, such as Matahematics, Physics, General programming, Electrotechnics, Measuring technics, Electronics, Semi-conductor elements. The second part of the education includes the last 4 semesters and contains courses, which form the specializing part of the education in automatics. Some of them are Control theory, Microprocessors, Microcontrollers, Programmable logic controllers, Computer-based systems etc.
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Graduating in time
60.9
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
2
/130
13
Graduates employment in the region
51-75
Total number of students
45
Students in their 1st year
22
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
The teaching plan is organized in three semesters. During their education in the Master’s degree in Automation the students gain knowledge and skills in the fields of: Optimization methods, Industrial information systems, Nonlinear systems control, Con...
The teaching plan is organized in three semesters. During their education in the Master’s degree in Automation the students gain knowledge and skills in the fields of: Optimization methods, Industrial information systems, Nonlinear systems control, Control systems with programmable logic controllers, Building automation systems, Industrial robots etc.
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Graduating in time
73.5
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
2
/130
13
Graduates employment in the region
51-75
Total number of students
49
Students in their 1st year
17
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
The Department of Computer Systems and Technologies has specialized laboratories for conducting practical classes and research, equipped with modern measurement tools and computers. Students who graduate in Computer Systems and Technologies find profes...
The Department of Computer Systems and Technologies has specialized laboratories for conducting practical classes and research, equipped with modern measurement tools and computers. Students who graduate in Computer Systems and Technologies find professional realization in executive and leading positions in: Design and development teams, organizations, institutions and companies as system or application software developers, architects or designers of specific application embedded hardware platforms, wired and wireless systems, networks and information technologies.
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Graduating in time
61.2
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
2
/130
13
Graduates employment in the region
51-75
Total number of students
52
Students in their 1st year
16
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
The master's degree aimed at continuing professional development, which will involve a majority of learning that takes place in a professional or practice environment: Multimedia Systems, Digital Communications, Electromagnetic Compatibility, High-spee...
The master's degree aimed at continuing professional development, which will involve a majority of learning that takes place in a professional or practice environment: Multimedia Systems, Digital Communications, Electromagnetic Compatibility, High-speed Communications, Cable Television Networks, Satellite Television Networks, Teletraffic Theory. The master's study program includes 90 credits, 12 subjects (10 compulsory subjects and 2 elective subjects) with total workload of 615 hours.
Restricted admission in academic year 2012/13
yes
yes
Programme type
full time, part time
full time, part time
Student-staff ratio
85.3
5.3
Graduating on time (bachelors)
59.9
%0
100
Graduating on time (masters)
68.6
%0
100
Academic staff with doctorates
96
%0
100
Contact with work environment (bachelors)
5
/90
9
Contact with work environment (masters)
4
/90
9
Gender balance
Overall learning experience
1.46
6
1
Quality of courses & teaching
1.61
6
1
Organisation of program
1.54
6
1
Contact with teachers
1.46
6
1
Inclusion of work/practical experience
1.79
6
1
Library facilities
1.58
6
1
Laboratory facilities
1.59
6
1
IT provision
1.79
6
1
Digital teaching
2
6
1
Room facilities
1.63
6
1
External research income
4.5
0
795.2
Doctorate productivity
0.11
0
1.3
Research publications (absolute numbers)
2
1
3,913
Citation rate
Top cited publications
0
23.4
Interdisciplinary publications
Research orientation of teaching
1.76
6
1
Income from private sources
52.6
%0
100
Co-publications with industrial partners
Publications cited in patents
BA theses in cooperation with private organisations
17,92
MA theses in cooperation with private organisations
18,64
International orientation of bachelor programmes
5
/150
15
International orientation of master programmes
0
15
Opportunities to study abroad
1.95
6
1
International doctorate degrees
0
86.67
International joint publications
International research grants
54.3
0
100
Student internships in the region
80.5
%0
100
Regional joint publications
Academic staff (fte)
25
Total number of students in field (major)
63
Percentage of female students
5
%Profile in teaching & learning
The Department of Electronics is providing teaching and learning courses in semiconductor components , microelectronics, analog and digital circuits and systems, optoelectronics, Sensors, Microprocesso r Circuitry, Electronic Computer Aided Design; Ele...
The Department of Electronics is providing teaching and learning courses in semiconductor components , microelectronics, analog and digital circuits and systems, optoelectronics, Sensors, Microprocesso r Circuitry, Electronic Computer Aided Design; Electronic Technological Processes and Devices, Power Convertion, Design and Technology of Electronic Equipment, PLC, Computer Systems, Electronic Techno logy and Equipment, Electronic Drive Regulators, Industrial Convertor Systems, Embedded Microsystems Website: http://electronica-tugab.eu
Teaching & learning website
www.tugab.bg
Profile in research
The Department of Electronics has a number of modern specialized laboratories for research in the ar eas of Power Electronics, Microelectronic Systems, Optoelectronics and Sensor Technics, Digital Elec tronics, Microprocessor Circuitry, Electronic Comp...
The Department of Electronics has a number of modern specialized laboratories for research in the ar eas of Power Electronics, Microelectronic Systems, Optoelectronics and Sensor Technics, Digital Elec tronics, Microprocessor Circuitry, Electronic Computer Aided Design; Electronic Technological Proces ses and Devices; Computer Systems, PLC and Microcontrolers, Design and Technology of Electronic Equi pment Website: hthttp://electronica-tugab.eu
Research website
www.tugab.bg
Major profile of faculty
Electrical and electronic engineering;
Electrical and electronic engineering;
Graduating in time
56.8
%0
100
Contact with work environment
5
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
5
/130
13
Graduates employment in the region
51-75
Total number of students
220
Students in their 1st year
58
International students
Period of study
4
year(s)Tuiton fees for national students
332
€Tuiton fees for international students
332
€Special features of the study programmes
The curricula of specialty for degrees "Bachelor" and "Master" with in these courses are in accordance with the curricula of Bulgarian and foreign technical universities. The main subjects taught are: electrical equipment, electrical machines, electric...
The curricula of specialty for degrees "Bachelor" and "Master" with in these courses are in accordance with the curricula of Bulgarian and foreign technical universities. The main subjects taught are: electrical equipment, electrical machines, electrical networks and systems, electric power stations and substations, electric automation, lighting and Installation equipment, electric power distribution and others. Specialized training is conducted in ten specialized teaching equipped with modern measuring and computer equipment, using specialized licensed software and CAD.
Programme type
full time, part time
full time, part time
Graduating in time
65.8
%0
100
Contact with work environment
5
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
5
/130
13
Graduates employment in the region
26-50
Total number of students
139
Students in their 1st year
52
International students
Period of study
4
year(s)Tuiton fees for national students
332
€Tuiton fees for international students
332
€Special features of the study programmes
The curricula of specialty for degrees "Bachelor" and "Master" with in these courses are in accordance with the curricula of Bulgarian and foreign technical universities. The main subjects taught are: electrical equipment, electrical machines, electric...
The curricula of specialty for degrees "Bachelor" and "Master" with in these courses are in accordance with the curricula of Bulgarian and foreign technical universities. The main subjects taught are: electrical equipment, electrical machines, electrical networks and systems, electric power stations and substations, electric automation, lighting and Installation equipment, electric power distribution and others. Specialized training is conducted in ten specialized teaching.
Programme type
full time, part time
full time, part time
Graduating in time
66.7
%0
100
Contact with work environment
4
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
0
13
Graduates employment in the region
26-50
Total number of students
11
Students in their 1st year
4
International students
Period of study
2
year(s)Tuiton fees for national students
547
€Tuiton fees for international students
547
€Special features of the study programmes
The master's degree is aimed at continuing professional development, which specialized in a professional or practice field of: • Designing, Assembling and Diagnostic works in the field of: Sensors, Sensor Systems, Convertor Devices and Actuators; Elect...
The master's degree is aimed at continuing professional development, which specialized in a professional or practice field of: • Designing, Assembling and Diagnostic works in the field of: Sensors, Sensor Systems, Convertor Devices and Actuators; Electro-equipment, Electrical Drives and Electronic Regulators in Automobiles, Electronic Systems in Internal Combustion Engines; Devices and Systems for Normal Functioning of the Automobiles; • Productions of Electronic Automobile Systems; • Design, Assembly, Settings and Maintenance of Security Systems.
Programme type
part time
part time
Graduating in time
62.1
%0
100
Contact with work environment
4
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
0
13
Graduates employment in the region
26-50
Total number of students
58
Students in their 1st year
10
International students
Period of study
2
year(s)Tuiton fees for national students
547
€Tuiton fees for international students
547
€Special features of the study programmes
Students who graduate with a Master’s degree in “OCCUPATIONAL SAFETY” have acquired the following skills and knowledge which will enable them to: analyze and estimate industrial hazards and labour conditions;develop and introduce technical, technologic...
Students who graduate with a Master’s degree in “OCCUPATIONAL SAFETY” have acquired the following skills and knowledge which will enable them to: analyze and estimate industrial hazards and labour conditions;develop and introduce technical, technological and managerial decisions aiming at prevention and minimizing of industrial hazards and improvement of labour conditions;conduct practical and scientific research in the field of safety engineering including labour hygiene;instruct and train technical staff, workers and others how to be aware of occupational hazards.
Programme type
part time
part time
Graduating in time
71.2
%0
100
Contact with work environment
4
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
0
13
Graduates employment in the region
51-75
Total number of students
120
Students in their 1st year
60
International students
Period of study
2
year(s)Tuiton fees for national students
440
€Tuiton fees for international students
440
€Special features of the study programmes
Diploma for graduated with degree "Master" in " Electric Power Engineering and Electrical Equipment" is necessary document to obtain a design legal capacity of the Chamber of Engineers in Investment Design (CEID) and work in licensed by the Agency for ...
Diploma for graduated with degree "Master" in " Electric Power Engineering and Electrical Equipment" is necessary document to obtain a design legal capacity of the Chamber of Engineers in Investment Design (CEID) and work in licensed by the Agency for Sustainable Energy Development (SEDA) companies for energy efficiency audits of buildings and industrial systems.
Programme type
full time, part time
full time, part time
Graduating in time
71.4
%0
100
Contact with work environment
4
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
0
13
Graduates employment in the region
26-50
Total number of students
24
Students in their 1st year
7
International students
Period of study
2
year(s)Tuiton fees for national students
358
€Tuiton fees for international students
358
€Special features of the study programmes
The Department of Electronics has specialized laboratories for conducting practical classes and research, equipped with modern electronic measurement tools and computers. Students who graduate in Electronics can find employment.The bachelor's degree ai...
The Department of Electronics has specialized laboratories for conducting practical classes and research, equipped with modern electronic measurement tools and computers. Students who graduate in Electronics can find employment.The bachelor's degree aimed at initial professional development. The bachelor's study program includes 240 credits, 48 subjects (37 compulsory subjects, 7 elective subjects and 4 internship works) with total workload of 2555 hours. The study program involve a large number of learning that takes place in different areas of specialization.
Programme type
full time, part time
full time, part time
Student-staff ratio
92.6
5.2
Graduating on time (bachelors)
81.4
%0
100
Graduating on time (masters)
79.4
%0
100
Academic staff with doctorates
88.4
%0
100
Contact with work environment (bachelors)
3
/90
9
Contact with work environment (masters)
1
/90
9
Gender balance
0.03
2.75
0.03
Overall learning experience
1.08
6
1
Quality of courses & teaching
1.44
6
1
Organisation of program
1.45
6
1
Contact with teachers
1.35
6
1
Inclusion of work/practical experience
1.46
6
1
Library facilities
1.62
6
1
Laboratory facilities
1.51
6
1
IT provision
1.66
6
1
Digital teaching
1.81
6
1
Room facilities
1.46
6
1
External research income
5.7
0.4
1,027.02
Doctorate productivity
0.1
0
1.6
Research publications (absolute numbers)
8
1
1,589
Citation rate
Top cited publications
0
32.1
Interdisciplinary publications
Research orientation of teaching
1.55
6
1
Income from private sources
8.7
%0
100
Co-publications with industrial partners
Publications cited in patents
BA theses in cooperation with private organisations
51,08
MA theses in cooperation with private organisations
International orientation of bachelor programmes
6
/150
15
International orientation of master programmes
3
/150
15
Opportunities to study abroad
1.35
6
1
International doctorate degrees
6.7
%0
76.19
International joint publications
International research grants
25.3
0
98.5
Student internships in the region
0
100
Regional joint publications
Academic staff (fte)
45
Total number of students in field (major)
103
Percentage of female students
34
%Other study programmes
Computer Design in Industry (М) Textile Engineering and Technologies (M)
Computer Design in Industry (М) Textile Engineering and Technologies (M)
Profile in teaching & learning
This department is a leader in training students in Mechanical engineering. Training is carried out in Bachelor , Master’s and Ph.D degree courses all of which have been accredited in 2004 .All syllabi are developed in accordance with the latest tenden...
This department is a leader in training students in Mechanical engineering. Training is carried out in Bachelor , Master’s and Ph.D degree courses all of which have been accredited in 2004 .All syllabi are developed in accordance with the latest tendencies occurring in the field of textile engineering and technologies , and are in line with the training carried out in related departments of other technical universities across EU. For well over forty years, the Department has marked a considerable progress within the structure of the Technical University of Gabrovo.
Teaching & learning website
www.tugab.bg
Profile in research
Specialized laboratories which conduct training and research operate on the territory of the Department. These are laboratories with more than 300 units of metalworking equipment including universal machines and machines with CNC, technology and toolin...
Specialized laboratories which conduct training and research operate on the territory of the Department. These are laboratories with more than 300 units of metalworking equipment including universal machines and machines with CNC, technology and tooling, robots, as well as with modern computer and measuring equipment and licensed software - specialized laboratories in: Materials Science, Metal Casting, Metal Welding, Plastic Deformation, Powder Metallurgy, Electro-physical Technologies, Thermal and Chemical Heat Treatment, X-ray Analysis, Electronic Microscopy.
Research website
www.tugab.bg
Major profile of faculty
Applied mechanics, Thermodynamics,
Applied mechanics, Thermodynamics,
Graduating in time
79.1
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
6
/130
13
Graduates employment in the region
1-25
Total number of students
174
Students in their 1st year
54
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
Successful graduates in Mechatronics are well able to find employment positions as: designers of technical systems, plant items, machinery and various purpose complexes containing mechatronic modules in the form of sensor, actuating and control device...
Successful graduates in Mechatronics are well able to find employment positions as: designers of technical systems, plant items, machinery and various purpose complexes containing mechatronic modules in the form of sensor, actuating and control devices as well as of the respective algorithmic and program back-up of computer control. They are well able to hold positions as designers of robots and robotized systems for both industrial and non-industrial purposes; be appointed as service and marketing experts in manufacturing, designing.
Programme type
full time, part time
full time, part time
Graduating in time
79.5
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
3
/130
13
Graduates employment in the region
1-25
Total number of students
141
Students in their 1st year
37
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
The training of energy engineers in “Heat, ventilation, air-conditioning” is carried out in accordance with the Bachelor degree curriculum. Successful graduates of the bachelor degree course are eligible to continue their studies in Master’s degree co...
The training of energy engineers in “Heat, ventilation, air-conditioning” is carried out in accordance with the Bachelor degree curriculum. Successful graduates of the bachelor degree course are eligible to continue their studies in Master’s degree courses and after that in doctoral degree courses. Training encompasses a broad spectrum subjects which ensure solid scientific, theoretic and practical base.
Programme type
full time, part time
full time, part time
Graduating in time
80.7
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
3
/130
13
Graduates employment in the region
1-25
Total number of students
49
Students in their 1st year
10
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
Successful graduates of the Bachelor’s degree course in Textile engineering and technologies are supposed to do well as professional researchers, designers, developers, managers , marketing analysts in companies and academic teachers in institutes of h...
Successful graduates of the Bachelor’s degree course in Textile engineering and technologies are supposed to do well as professional researchers, designers, developers, managers , marketing analysts in companies and academic teachers in institutes of higher learning related with the design and production of textile and clothes making equipment and technologies as well as activities closely related with company management, marketing research of textile industry, participation in all spheres of national economy, science and education.
Programme type
part time
part time
Graduating in time
84.5
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
1-25
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
207
Students in their 1st year
60
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
Successful graduates who have taken bachelor degree in “Computer technologies in mechanical engineering” possess adequate theoretic knowledge and practical skills which determine their ability for: - CAD design of machines and equipment in all fields ...
Successful graduates who have taken bachelor degree in “Computer technologies in mechanical engineering” possess adequate theoretic knowledge and practical skills which determine their ability for: - CAD design of machines and equipment in all fields of industry. - Computer technologies in mechanical engineering. - Introduction of modern computer systems for CAD and programming of CNC machines. - Participation as organizers and managers or as experts in teams which manufacture, operate and maintain engineering equipment.
Programme type
full time, part time
full time, part time
Graduating in time
74.2
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
26-50
Program international orientation
3
/130
13
Graduates employment in the region
1-25
Total number of students
69
Students in their 1st year
45
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
The fundamental training of specialists who major in EPTE is based on the competence in mathematics, physics, chemistry, informatics, materials science, technology of engineering materials, machine elements, metrology and measuring equipment, thermal...
The fundamental training of specialists who major in EPTE is based on the competence in mathematics, physics, chemistry, informatics, materials science, technology of engineering materials, machine elements, metrology and measuring equipment, thermal engineering and thermodynamics, electrical engineering and electronics, economics. Wide spectrum specialized training is built-up on knowledge about manufacturing and precision engineering, hydro-pneumatic drives, heat and mass exchange processes, chemical processes in environment, ecology, environmental pollution.
Programme type
full time
full time
Graduating in time
87.5
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
26-50
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
90
Students in their 1st year
11
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
Specialists in CDI should be well trained in their degree course major by acquiring broad fundamental, multi-profiled and specialized professional background. The course curriculum includes subjects in natural sciences, design, ergonomic, plastic art...
Specialists in CDI should be well trained in their degree course major by acquiring broad fundamental, multi-profiled and specialized professional background. The course curriculum includes subjects in natural sciences, design, ergonomic, plastic art, economy management and humanities. Prospective design engineers enlarge their competence in color science, theory of composition, graphic design, ergonomics, modelling and shaping, etc. In view of the specifics of CDI as integrative professional area and in conformity with the world practice.
Programme type
full time
full time
Graduating in time
94.9
%0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
51-75
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
45
Students in their 1st year
34
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
Successful graduates acquire the professional qualification of master-engineer and are qualified to hold positions as: • Designers and product engineers of items in the field of mechanical and precision engineering; • Coordinators of program teams w...
Successful graduates acquire the professional qualification of master-engineer and are qualified to hold positions as: • Designers and product engineers of items in the field of mechanical and precision engineering; • Coordinators of program teams which include mechanical and electrical engineers; • Managers of manufacturing companies or units; centers for development and introduction of modern technologies; • Experts attached to companies and affiliations; • Metrology engineers in bodies for quality control and centers for environmental monitoring
Programme type
full time, part time
full time, part time
Graduating in time
83
%0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
51-75
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
49
Students in their 1st year
21
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
Training encompasses a broad spectrum subjects which ensure solid scientific, theoretic and practical base. The first four semesters of study include disciplines which are common for each machine engineer and include : Calculus, Physics, Mechanics, Mec...
Training encompasses a broad spectrum subjects which ensure solid scientific, theoretic and practical base. The first four semesters of study include disciplines which are common for each machine engineer and include : Calculus, Physics, Mechanics, Mechnics of fluids, Heat and mass transfer, Engineering graphics, Materials science, Machine parts, Strenght of materials, Thermodynamics, Electrical engineering and electronics.
Programme type
full time, part time
full time, part time
Graduating in time
36.4
%0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
26-50
Program international orientation
3
/130
13
Graduates employment in the region
1-25
Total number of students
32
Students in their 1st year
32
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
The Master’s degree course meets the demand of experts in heating, ventilation and air-condition engineering, new energy sources and environmental protection.Training is carried out in conformity with а preliminary endorsed curriculum for acquisi...
The Master’s degree course meets the demand of experts in heating, ventilation and air-condition engineering, new energy sources and environmental protection.Training is carried out in conformity with а preliminary endorsed curriculum for acquisition of Master’s degree and the relevant European standards in this field.
Programme type
full time, part time
full time, part time
Graduating in time
88.1
%0
100
Contact with work environment
3
/90
9
Relative rate of graduate unemployment
51-75
Program international orientation
3
/130
13
Graduates employment in the region
1-25
Total number of students
103
Students in their 1st year
25
International students
0
Period of study
4
year(s)Tuiton fees for national students
166
€Tuiton fees for international students
166
€Special features of the study programmes
АSTER ENGINEERS in MECHANICAL ENGINEERING AND TECHNOLOGIES possess a substantial bulk of theoretical knowledge and practical experience that underlie their vocational aptitude for: - research and optimization of projects in the field of mechanical ...
АSTER ENGINEERS in MECHANICAL ENGINEERING AND TECHNOLOGIES possess a substantial bulk of theoretical knowledge and practical experience that underlie their vocational aptitude for: - research and optimization of projects in the field of mechanical engineering; - design and engineering development of equipment; technology-based tool engineering; - application of CAD/CAE/CAM systems for design, research and manufacture of mechanical engineering articles;
Programme type
part time
part time
Graduating in time
85.2
%0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
26-50
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
10
Students in their 1st year
10
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
Successful course graduates take the degree master-engineer and possess the qualification to hold prospective positions as: • Designers and product engineers of equipment and devices for control and analysis of industrial pollution; • Coordinators o...
Successful course graduates take the degree master-engineer and possess the qualification to hold prospective positions as: • Designers and product engineers of equipment and devices for control and analysis of industrial pollution; • Coordinators of program teams staffed by chemical engineers, mechanical engineers and electrical engineers; • Managers of production companies or units, centers for development and introduction of modern technologies in ecology; Experts attached to state and private companies and affiliations in the sphere of ecology
Programme type
full time, part time
full time, part time
Graduating in time
0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
51-75
Program international orientation
3
/130
13
Graduates employment in the region
26-50
Total number of students
41
Students in their 1st year
41
International students
0
Period of study
2
year(s)Tuiton fees for national students
179
€Tuiton fees for international students
179
€Special features of the study programmes
COMPUTER METHODS AND TECHNOLOGIES IN MECHANICAL ENGINEERING possess a substantial bulk of theoretical knowledge and practical experience that underlie their vocational aptitude for: - design and engineering development of equipment; technology-based ...
COMPUTER METHODS AND TECHNOLOGIES IN MECHANICAL ENGINEERING possess a substantial bulk of theoretical knowledge and practical experience that underlie their vocational aptitude for: - design and engineering development of equipment; technology-based tool engineering; - application of CAD/CAE/CAM systems for design, research and manufacture of mechanical engineering articles; - digital prototyping of products; - modern NC control of manufacturing equipment; - design and introduction of technical and organizing systems for quality control in mechanical engineering.
Programme type
full time, part time
full time, part time
Student-staff ratio
27.8
101
5.2
Graduating on time (bachelors)
73.3
%0
100
Graduating on time (masters)
79.4
%0
100
Academic staff with doctorates
100
%0
100
Contact with work environment (bachelors)
2
/90
9
Contact with work environment (masters)
1
/90
9
Gender balance
4
0.04
Overall learning experience
1.53
6
1
Quality of courses & teaching
1.8
6
1
Organisation of program
1.53
6
1
Contact with teachers
1.77
6
1
Inclusion of work/practical experience
2.04
6
1
Library facilities
1.89
6
1
Laboratory facilities
1.91
6
1
IT provision
2
6
1
Digital teaching
2.26
6
1
Room facilities
1.87
6
1
External research income
0
531.1
Doctorate productivity
Research publications (absolute numbers)
1
291
Citation rate
0.13
2.61
Top cited publications
0.4
32.8
Interdisciplinary publications
0
18.2
Research orientation of teaching
1.86
6
1
Income from private sources
Co-publications with industrial partners
0
17.2
Publications cited in patents
0
5.1
BA theses in cooperation with private organisations
86,67
MA theses in cooperation with private organisations
80,39
International orientation of bachelor programmes
2
/150
15
International orientation of master programmes
6
/150
15
Opportunities to study abroad
2.18
6
1
International doctorate degrees
International joint publications
13.1
86
International research grants
Student internships in the region
0
100
Regional joint publications
0
54.3
Academic staff (fte)
10
Total number of students in field (major)
278
Percentage of female students
41
%Profile in teaching & learning
The Bachelor graduates of This course are prapared of work on problems of organization and management of SMEs. They can organize teams to develop enteprenuerial strategies and regular production. The obtained theoretical knowledge and practical skills ...
The Bachelor graduates of This course are prapared of work on problems of organization and management of SMEs. They can organize teams to develop enteprenuerial strategies and regular production. The obtained theoretical knowledge and practical skills allow them to esaily overcome the barrier of uncertainty and quikly adapt to the business circles and solve technical and economic problems in conditions of compettitive pressure from the foreing markets.
Teaching & learning website
www.tugab.bg
Profile in research
The educational, research and creative activity of Department staff have contributed to implementing the mission of TU-Gabrovo. The good academic work, the active research activity, the available facilities and infarmation base provide perfect conditio...
The educational, research and creative activity of Department staff have contributed to implementing the mission of TU-Gabrovo. The good academic work, the active research activity, the available facilities and infarmation base provide perfect conditions for the scientific development of the lecturers and the active involvement of the students. Specialized laboratories equipped with modern technical devices and modern software are also used in the training process. This helps atudents in gaining practical experience and skills in studing and solving problem situations.
Research website
www.tugab.bg
Major profile of faculty
General' Mechanical engineering
General' Mechanical engineering
Graduating in time
73.3
%0
100
Contact with work environment
2
/90
9
Relative rate of graduate unemployment
51-75
Program international orientation
2
/130
13
Graduates employment in the region
> 75
Total number of students
193
Students in their 1st year
40
International students
0
Period of study
4
year(s)Tuiton fees for national students
281
€Tuiton fees for international students
281
€Special features of the study programmes
The degree course "Industral Managment"provides students with adequate preparation corresponding to the requirements existing in the Member States of EU in the field of industrial production. The curriculum of the Bachelor programme includes basic engi...
The degree course "Industral Managment"provides students with adequate preparation corresponding to the requirements existing in the Member States of EU in the field of industrial production. The curriculum of the Bachelor programme includes basic engineering courses in mechanicl engineering, electrical engineering and electronics. The specialized courses include preparation of students in the field of economics and finance, basic managment, marceting, engineering and production managment, innovations and investment solutions, quality managment.
Programme type
full time, part time
full time, part time
Graduating in time
79.4
%0
100
Contact with work environment
1
/90
9
Relative rate of graduate unemployment
26-50
Program international orientation
6
/130
13
Graduates employment in the region
> 75
Total number of students
85
Students in their 1st year
21
International students
0
Period of study
1
year(s)Tuiton fees for national students
Tuiton fees for international students
Special features of the study programmes
Masret programme"Managment and Industrial Enterprise"and "Innovation and Investment Managment". Training of specialist in both educational-qualification degrees is achieved through complusory, elective and optional subjects, which in turn are general, ...
Masret programme"Managment and Industrial Enterprise"and "Innovation and Investment Managment". Training of specialist in both educational-qualification degrees is achieved through complusory, elective and optional subjects, which in turn are general, technical, economic and legal. Particular attention is paid to language and computer training. The department of Managemant provides the use of specialized laboratories with modren equipment and software. Practical training is conducted on a contractual basis in a variety of modern enterpriseses.
Programme type
full time, part time
full time, part time
This page allows you to opt out of optional cookies used by the U-Multirank website.
Once you have set your cookie preferences, we will follow the specific choices you made. Please remember that if you delete your cookies, or use a different browser or computer, you will need to set your cookie preferences again.
These cookies enable core site functionality. It is not possible to disable these cookies since our services do not work without them. They are emitted by the CMS and by the U-Multirank Data Collection-API and they hold information about your choices. They are used for functional purposes only and are not valid beyond this session.
These cookies are used to track performance and to monitor functionality of the website. This information helps us to optimize our services. Embedded partners are Google Analytics, Google Tag Manager, DoubleClick and HotJar.